mpja
New Member
Posts: 45
|
Post by mpja on Jun 4, 2015 12:47:20 GMT -6
After breaking half of the drive line in my 2003 TJ, I decided to do a full drive line swap with a 89 jeep grand wagoneer. So my TJ has a AMC 360 V8 and a torque flight 727 automatic and a AMC 208 transfer case. Along with leaf springs and Dana 44's front and rear. Currently I am working on the axles and getting the leafs mounted, my lift should be between 5 to 7 inches.
|
|
mpja
New Member
Posts: 45
|
Post by mpja on Jun 8, 2015 21:10:57 GMT -6
Well I started the SOA today. I got the perches welded on and pinion angle set, now I just need to install the high steer and secure everything and the front is complete.
|
|
mpja
New Member
Posts: 45
|
Post by mpja on Jun 10, 2015 11:54:57 GMT -6
Well I ordered my crossover steering and my extended brake lines, so I can finish up the front axle on the jeep.
|
|
|
Post by dmurphy on Jun 10, 2015 16:13:07 GMT -6
Who makes the steering setup Scott.
|
|
mpja
New Member
Posts: 45
|
Post by mpja on Jun 10, 2015 16:40:04 GMT -6
Who makes the steering setup Scott. The kit I got came from a auto supply wearhouse, I only know that the knuckle is made by Reid racing, so I would assume that the rest came from them. Their is like6 company that carry the parts and kits
|
|
mpja
New Member
Posts: 45
|
Post by mpja on Oct 7, 2015 16:25:58 GMT -6
Update, after water getting in the motor the build is on hold until 2016. After a rash of things going bad from sitting or just getting rained on, the build is stopped till more parts and such can be aquaired.
|
|